# Aastra 67xxxi configuration file (MX-ONE 4.1) # ================================================================ # Date: December 21st, 2010 # Verified Terminal 6739i-FW: 3.0.1.2024 # Verified Terminal 675xi,6730i,6731i-FW: 2.6.0.2010 # companion configuration template: aastra.cfg.template # # IF FREE SEATING IS USED AS DEPLOYMENT METHOD FOR A USER THIS FILE SHOULD NOT BE USED # You may have a need to use this file if the phone shall be set up as HotLine(see below) # # "active" options,ie not listed as comment, "#", is a working example # with together with the companion template aastra.cfg file. # # Rename this file to the .cfg . as in the terminal's mac address listed under the terminal (for example, "00085d0304f4.cfg") # This .cfg can be used to override aastra.cfg settings #---------------------------------------------------------------------- #If TLS shall be used, the certificates and outbound proxy must be set. #MX-ONE listens for TLS on port:5061 #---------------------------------------------------------------------- #sips persistent tls: 1 #sip outbound support: 1 #sip transport protocol: 4 # use UDP (1), TCP (2), both SIP and UDP (0, TLS(4) for sip messaging #sips trusted certificates: trustedCert.pem #sip outbound proxy: 10.105.20.31 #sip outbound proxy port:5061 #sip srtp mode: 1 #0(SRTP disabled),1(SRTP preferred),2(SRTP only) #----------------------------------------------------------------------------- # Terminal set up for extension: "sip line1 user name" #----------------------------------------------------------------------------- # SIP Line 1 sip line1 user name:57444 #Enter user extension number #If password is defined via auth_code_init #sip line1 password: sip proxy ip: 10.105.20.31 sip proxy port: 5060 sip registrar ip: 10.105.20.31 sip registrar port: 5060 #Backup registrar and proxy may be set for Redundancy #sip backup proxy ip: 192.168.20.32 #sip backup proxy port: 5060 #sip backup registrar ip: 192.168.20.32 #sip backup registrar port: 5060 #Hot-line. Example auto dial to 8500 after 3s. #If the handset is lift an no digits is entered within 3s, the terminal dials 8500 #sip line1 autodial number: 8500 #sip line1 autodial timeout: 3 #------------------------------------------------------------------ # Key configuration # # Consider teaching the end-user to set softkeys or prgkey keys # using the web-GUI to the terminal using username "user" # and no password(left blank) # Note: the below settings are set on the terminal, so it only # make sense to define keys if the terminal is personal # (i.e not "free-seating" unless the terminal always will # have the same user). The MX-ONE extension_key settings # will be set for the extension logged on. # # Programmable keys # 53i: prgkey1 - prgkey6 # 55i: prgkey1 - prgkey6 # 55i, 57i, and 57i CT: softkey1 - softkey20 # 57i, 57i CT: topsoftkey1 - topsoftkey10 # 6739i - softkey1-softkey55 # # softkeyN/topsoftkeyN/prgkeyN type: # softkeyN/topsoftkeyN label: # softkeyN/topsoftkeyN/prgkeyN value: # softkeyN/topsoftkeyN/prgkeyN line: # softkeyN states: # softkeyN/topsoftkeyN/prgkeyN locked: #softkey1 type: speeddial # # MX-ONE extension_key (MNS,TNS,MCT) supports all Aastra 67xxi. # In ip_telephony.conf, 'extension_key --key N' mapping to (softkey/topsoftkey/prgkey(N+offset) # is defined per model). For Aastra 6739i 'extension_key --key 1' will use softkey10 (as offset=9). #softkey19 label: "Break-thr 65555" #softkey19 value: "*60*65555#" #softkey19 type: speeddial #softkey20 label: "Anonomous 65555" #softkey20 value: "*42#65555" #softkey20 type: speeddial #---------------------------------------------------------- #This .cfg can be used to override aastra.cfg settings #The following parameters might want to be set per terminal #---------------------------------------------------------- #sip line1 dtmf method: 1 #0(RTP),1(SIP INFO),2(BOTH) #sip explicit mwi subscription: 0 #0(disabled), 1(enabled). Message Waiting Indication, i.e VoiceMail notification # #In case the DM (Solidus eCare agent) shall be able to make a call via Aastra 67xxi terminal, #the DM host IP address must be set in 'xml application post list' #xml application post list: 10.105.111.111 #